Softening Water Equipment LR-10T Fully Automatic Water Softener

Working Principle of Water Softening Equipment:

Raw water passes through cation and anion exchange resins to remove ions such as calcium, magnesium, and sodium. The resulting water consists only of water molecules, free from other ions, effectively preventing scale formation.
Water hardness is mainly caused by calcium and magnesium ions. When raw water containing hardness passes through the resin layer of the softening equipment, calcium and magnesium ions are adsorbed by the resin while sodium ions are released. The water flowing out of the resin tank is softened water with hardness ions removed. Once the resin becomes saturated with adsorbed calcium and magnesium ions, the hardness of the output water increases. At this point, the softening equipment automatically initiates the regeneration process according to a preset program, using a high-concentration saline solution to restore the exhausted resin to its sodium form.

Applications of Water Softening Equipment LR-10T Fully Automatic Water Softener:

It can be widely used for softening makeup water in systems such as steam boilers, hot water boilers, heat exchangers, evaporative condensers, air conditioning units, and direct-fired chillers. It is also suitable for treating domestic water in hotels, restaurants, office buildings, apartments, and homes, as well as for softening water in industries like food and beverage, brewing, laundry, printing and dyeing, chemicals, and pharmaceuticals.

Reference Table for Matching and Selection of Water Softening Equipment LR-10T Fully Automatic Water Softener:

① Controller: Divided into automatic and manual control. Brands can be selected from imported or domestic options.

② Resin Tank: The tank material for water softening equipment includes fiberglass, carbon steel, and stainless steel.

③ Equipment Control Type: One type automatically regenerates when the prepared water volume reaches the set value, known as flow type; suitable for all water supply system softening treatment equipment. The second type uses time as the control metric for regeneration, known as time type; suitable for water supply systems with stable flow, with the shortest regeneration cycle being 24 hours.

④ Equipment Configuration:

Single-control single bed: Stops water supply for 2 hours during regeneration or continues supplying raw water (hard water bypass).

Single-control dual bed: Alternating water supply, one in use and one standby.

Dual-control dual bed: Alternating water supply, one in use and one standby.

Dual-control dual bed: Simultaneous water supply with alternating regeneration.

Multi-control multiple beds: Three or more softening resin tanks used in parallel, suitable for large water supply systems.